Skip to main content

Industry solutions · Vadodara, India

Evaporators & Condensers for Effluent Treatment & ZLD

Environmental EPCs and chemical plants search for MEE and TVR systems to concentrate effluent before crystallisation or disposal. Ohm Engineers sizes forced-circulation trains from mass and energy balances supplied on the RFQ — TVR when steam is available, not a default MVR substitute.

Primary equipment for this sector

Multi Effect Evaporators

Explore multi effect evaporators →
Effluent Treatment & ZLD process equipment manufactured by Ohm Engineers

Equipment scope

Multi Effect EvaporatorsSteam Jet VacuumHeat Exchangers

Multi-effect evaporators, TVR thermocompressor packages, steam-jet vacuum where required, and condenser heat exchangers — integrated scope per PO.

Equipment lines

3

Sector overview

What effluent treatment & zld buyers specify

Zero-liquid-discharge and effluent-treatment EPCs need evaporator trains that concentrate brine or chemical effluent before crystallisation or disposal. Multi-effect evaporators (MEE), thermocompressor (TVR) integration and condenser exchangers must be sized from mass and energy balances — not from a fixed effect count in a brochure.

Ohm Engineers builds forced-circulation MEE from simulation inputs on the RFQ. TVR is offered when steam is available; MVR is not presented as a default substitute. Materials follow chloride, acid or scaling chemistry named on the enquiry.

Typical duties

Brine concentrationEffluent volume reductionTVR steam economyPre-crystalliser concentrationCondensate recovery

Industry challenges

  • Fouling and scaling chemistry
  • Boiling-point elevation
  • Steam vs power utility choice
  • Corrosion in chloride effluent

How Ohm Engineers responds

  • Forced-circulation MEE from process simulation inputs
  • TVR packages to improve steam economy
  • Materials selected for chloride or acid effluent when specified
  • Integration with downstream crystalliser scope as defined on PO

Product lines

Equipment for Effluent Treatment & ZLD

All products →

Engagement

How supply works for effluent treatment & zld

01

Provide effluent composition, flow, target concentration and utility availability.

02

We confirm effect count, circulation type and MOC from your balance or simulation.

03

Manufacture effects and auxiliaries at Vadodara.

04

Commissioning support only when separately contracted.

FAQ

Common questions — Effluent Treatment & ZLD

Do you supply complete ZLD plants?
We manufacture MEE and related concentration equipment. Crystalliser and full ZLD turnkey scope follow what is written on the PO.
TVR or MVR?
TVR when steam is available on the utility sheet. We do not default to MVR without purchaser direction.
How do you handle fouling effluent?
Forced-circulation configuration and MOC selection follow the scaling chemistry data on the RFQ.

Enquiry — Effluent Treatment & ZLD

Short form first. We reply by email. Open the full engineering RFQ when you already hold process data or a purchaser datasheet.

Tell us what you need. We will reply by email and ask for process data if a quote requires it.

I have process data — open full engineering RFQ →

WHAT HAPPENS NEXT

  1. We receive your enquiry and reply by email.
  2. If a quote needs process data, we ask for the missing fields.
  3. A technical and commercial response follows when the case supports it.

Direct contact

+91 83470 19128/22
info@ohmengineers.co.in
ohmengineers@gmail.com

RFQ checklist →